Kohler GM77177-KP1 Load Control Module with Pre-Wired Harness was listed on Amazon for $850.00, selling for $669.00 USD brand new. Manufactured by Your Other Warehouse – Lawn & Garden. There are 2 units left brand new. If you prefer this product in used condition, there are 1 left on Amazon starting at $550.00.
Some great features of this product include:
- Load control module with pre-wired harness for 14RESAL, 20RESAL, 38RCL and 48RCL generators
- Monitors generator current and frequency; sheds loads to prevent generator overload
- Adds and sheds loads according to their priority; allows for the use of a smaller generator set
- For single-phase residential/commercial generator sets with RDC2 or DC2 controller and ATS
- Measures 5.3 by 15.4 by 18.4 inches
If you choose a smaller generator to power your home, the Kohler Load Control Module can help manage higher electrical loads. During a power outage, the entire home will be connected to generator power, but some circuits may by cycled on and off to prevent overloading.
Load control module with optional pre-wired harness. view larger When using generator power, the load control module cycles circuits on/off to prevent power overload. Kohler GM77177-KP1 Load Control Module with Pre-Wired Harness Designed for use with smaller generators, the Kohler GM77177-KP1 load control module (LCM) helps manage higher electrical loads. During a power outage your home’s power source will transfer over to generator power, at which point the load control module kicks in, cycling some circuits on and off to prevent power overload. The load control module is designed to work with Kohler single-phase residential/commercial generator sets that are equipped with the RDC2 or DC2 controller and an automatic transfer switch. This includes the following generator set models: 14RESA and 14RESAL 20RESA and 20RESAL 38RCL and 48RCL (single-phase only) The Kohler GM77177-KP1 load control module with a pre-wired harness works with 14RESAL, 20RESAL, 38RCL, and 48RCL generators. The load control module provides an automatic load management system to comply with Section 702.5 of NEC 2008. The installer is responsible for ensuring that the power system installation complies with all applicable state and local codes. The load control module automatically manages up to six residential loads. Four power relays are provided for management of non-essential secondary loads, and two relays are available to control two independent heating, ventilation, and air conditioning (HVAC) loads. The power relays are rated 50 A @ 240 VAC. A maximum of two 50 amp loads and two 40 amp loads may be connected. The HVAC relays are limited to 2 A @ 30 VAC. Note: Connect only non-essential loads to the load control module. Load Management The Load Control Module (LCM) sheds loads to prevent generator overload, in compliance with NEC 2008. The LCM monitors generator current and frequency to determine when to shed loads. This monitoring prevents frequency drops that can damage valuable electronics like computers and televisions. Load management with the LCM allows the use of a smaller generator set. Priority Setting Loads are added and shed according to their priority. Load 1 is the top priority, which is added first and shed last. Load 6 is the lowest priority. Less critical loads can be turned off automatically when essential appliances are running. Load priorities are hard-wired at installation. Standard Features The LCM can be used with Kohler generator sets equipped with the RDC2 or DC2 controller. Automatically manages up to six residential loads: Four power relays for management of non-essential secondary loads. Two 50 amp loads and two 40 amp loads can be connected. Two HVAC relays to control two independent air conditioner loads. User interface for load status indication: An industry first: Test button allows the operator to cycle the relays in the order of their priority (only functions when the generator set is in RUN mode). Dual color LEDs for each load indicate load status (powered or shed) and flash to indicate a test. NEMA 3R aluminum enclosure for indoor or outdoor installation. Available with two wiring options: — With 2-foot color-coded pre-wired harness for easy installation of the LCM next to the distribution panel. — With terminal block connections for installation of the LCM in any location. UL listed. CSA certification is available.
Starting at $550.00 used
Buy for $669.00 brand new
Save 21% ($181.00) by purchasing on Amazon.com